Our Cleaning Chemicals of BWD-01 is highly efficient decoloring flocculant applied in the treatment of effluent from dyestuff printing and dyeing, paper mills.
Specification:
Appearance: Transparent sticky liquid
Viscosity: 50 - 250mPa. S (20º C)
Solid content: >50%
PH 30% solution: 3 - 5
Specific gravity: 1.2 - 1.3 (25º C)
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, waste is precipitated orAir-floated and the water become clear
B) pH index of the waste water should be adjusted to 7 - 10 for better Result
C) If colority and COD are relatively high, it can be used with the help ofPolyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
10) Storage: Can be stored at room temperature, can not be placed in the Sun, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Audited Supplier 
){kind=link}
){kind=link}