• Nano Flocculant Fe for Wastewater Treatment
  • Nano Flocculant Fe for Wastewater Treatment
  • Nano Flocculant Fe for Wastewater Treatment
  • Nano Flocculant Fe for Wastewater Treatment
  • Nano Flocculant Fe for Wastewater Treatment
  • Nano Flocculant Fe for Wastewater Treatment

Nano Flocculant Fe for Wastewater Treatment

Acid-Base Property: Acidic Surface Disposal Agent
Certification: ISO 9001
Environmental Protection: Yes
Color: Blackish Green
Appearance: Liquid
Type: Sewage Treatment Chemicals
Samples:
US$ 1/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2007

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
BLUWAT F-7
Transport Package
IBC
Specification
ISO
Trademark
Bluwat
Origin
China
Production Capacity
10000 Ton/Year

Product Description

BLUWAT F7 is a high active liquid inorganic coagulant that offers higher efficient clarification in municipal and industrial wastewater treatment. BLUWAT F7 is Nano technology coagulant and have a lot of advantages for biological treatment process.

BLUWAT F7 can get better flocs structure and improve sedimentation of focs greatly, then improve MLSS and bacterial concentration during biological process, so treatment efficiency will be improved greatly. It is used in the treatment of the municipal and industrial wastewater treatment.

Nano Flocculant Fe for Wastewater Treatment
Nano Flocculant Fe for Wastewater Treatment
Nano Flocculant Fe for Wastewater Treatment

Nano Flocculant Fe for Wastewater Treatment


Better coagulation and sedimentation of flocs
Better SVI result
Decrease turbidity of treated water of 2nd sedimentation tank.
Promoting the growth and reproduction of bacteria in the aeration tank
Better removal of COD, BOD, TSS, TN and TP by 30-60%
Prevent Scam and Bulking problems
Reduction of sludge by 30-40%.
Better sludge dewatering efficiency
Lower treatment cost

Technical Data:
Specifications Data
Appearance Green to brown
Fe+2, % 7.5-8.5
Chlorides, % 0.42-2.5
Density g/cm3 20 ºC 1.2±0.1
pH 1-3
   
   
BLUWAT F7 should be dosed directly without dilution. A diaphragm metering pump of no-corrosive material is suitable.

Dosing point: After Aeration tank and before 2nd Sedimentation tank.
Package
IBC with 1250 kgs, 200 Lt drums, 24MT with flexi-tank

Applicable projects of BLUWAT F7:
1, The activated sludge settlement is relatively poor, improving the sludge settling ratio/SVI and improving the quality of treated effluent.
2, There is sludge bulking and sludge floating.
3, Improve sewage treatment plant treatment standard, increase the removal rate of COD, BOD, TSS, TN and TP.
4, Reduce contamination load of third stage treatment of the sewage treatment plant or replace the third stage treatment.
5. Partial and total substitution of flocculants such as polyaluminium Chloride and Ferric Sulphate to reduce the amount of chemical sludge
6, Increase the influent load of sewage plant and increase the sewage treatment capacity of existing facilities.
7. Improve the biological effect of biological system under low temperature in Winter.
8, Improve the stability and reliability of sewage treatment plant operation.
 

Send your message to this supplier

*From:
*To:
avatar Mr. LEO
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2007

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Year of Establishment
2004-01-02
Management System Certification
ISO 9001