Temperature-salt-resisting Polyacrylamide
Brief introduction
Temperature-salt-resisting Polyacrylamide is developed for the sewage in EOR (Enhanced oil recovery), it can help use sewage recycle and protect environment. It is mainly used in oil field with high salt and temperature.
Main Application
Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Well drilling mud raw materials:
In oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Functions:
Flocculant
The polarity gene adsorbs the solid particles dispersed in water, bridges between the particles and formats the large aggregates, sedimentation and separates of water, flocculates detritus and clay in drilling fluid.
Dispersant
In the drilling mud treatment, this product can improve the lubricity and stability of the mud to reduce the water loss, prevent sticking effectively, increase drilling efficiency.
Blocking Agent
The product can generate cross linking under the effect of Al3+, Fe 3+, Ca2+ and other ions, a part of high molecular compound is changed from linear shape into body shapes. The product is not water-soluble, and can be adsorbed on the borehole to block ground layer gaps and to prevent the leakage of drilling fluid.
Lubricant
The product can be absorbed on the surface of metal or clay particles to form liquid film to change friction on the solid surface into liquid frication, thereby lubricating drill bits and drills, lowering the mud cake frication coefficient, and reducing underground accidents.
Fluid Loss Additive
The hydrolysis degree is higher, the hydration group on the molecular chain is more, the hydration is better, and it changes from flocculant into fluid loss additive. Drilling mud should be treated to keep cake's permeability as low as possible in order to maintain a stable borehole and to minimize filtrate invasion, and damage to the pay zone.
Shale Inhibition Agent
The multi-point adsorption of polymer formats to the criss-cross membrane macromolecules, plays a role of enhancing the stability of borehole.
Uses
Used as oil displacement agent in the oil field with high temperature and mineralization degree
Packing & storage
25kg paper-plastic composite bag, or following your demand. Its powder can adsorb the moisture and become the block matter, thus it should be kept in dry, cool and ventilating place.
Technical index
|
BWEOR-1
|
BWEOR-2
|
BWEOR-3
|
Granularity (mesh)
|
20-80
|
Solid (%)
|
≥ 89
|
Dissolved time(h)
|
≤2
|
Insoluble matter (%)
|
≤0.2
|
Molecular weight(106)
|
≥2000
|
≥2500
|
≥3500
|
Degree of hydrolysis (%)
|
23-27
|
Residual monomer (%)
|
≤0.1
|
filtration ratio
|
≤2.0
|
Apparent Viscosity (mpa . s)
Concentration (1500mg/L)
degree of mineralization (19334mg/L)
Temp.( 75 )
|
≥11.5
|
≥12.5
|
≥12.5
|
Apparent Viscosity (mpa.s)
Concentration (1000mg/L)
degree of mineralization (2500mg/L)
Temp.( 45 )
|
≥40
|
≥45
|
≥50
|
Retention rate of shearing Viscosity (%)
|
≥80
|
Retention rate of static adsorption Viscosity (%)
|
≥80
|
Audited Supplier 
){kind=link}