Ferric Sulfate 21% Coagulant for Waste Water Treatment

Product Description

Ferric sulfate coagulant 21% Poly Ferric Sulfate for waste water treatment

Poly Ferric Sulfate (PFS) 21%
Chemical Name: Polymerized Ferric Sulfate, Polyferric Sulfate, Poly Ferric Sulfate, Polymeric Ferric Sulfate, Polyferric Sulphate, Poly Ferric Sulphate, Polymeric Ferric Sulphate
CAS No: 10028-22-5
EINECS: 233-072-9
Molecular Fomula: Fe2(Oh)N(So4)3-N/2]M
Apparence: Brown Powder
Purity: 21%, 22%

Coagulant Ferric Sulfate specification

Appearance:	Light Brown Powder
Fe^3+ Content (%):	21Min.
Restore Substances ( Fe^2+) Content%:	1.0% Max.
PH(1% water solution):	2.0-3.0
Insoluble Substances (%):	1.0 Max.

APPLICATION & USAGE
Poly Ferric sulfate(PFS) Mainly used on various industrial effluent treatment plants, such as electroplating wastewater, paper-making wastewater, municipal wastewater, oily wastewater, dye wastewater and chemical wastewater treatment and so on.
Poly ferric sulfate can use for industries wastewater treatment of printing & dyeing, paper making, electroplating, circuit board, food processing, pharmacy, fertilizer, pesticide etc.
Poly ferric sulfate is suitable for phosphorus removal of life sewage wastewater treatment plant or improving the hydrophobicity of sludge.
Poly ferric sulfate can be used to remove the residual aluminum pollution of tap water during its treatment.
Used to sludge press mud. It will have excellent effect with used with few of polyacrylamide.

PFS is used in drinking water treatment
Poly ferric sulfate can effectively reduce metal aluminum in drinking water, and can also remove bacteria, turbidity and chromaticity caused by corrosion of water supply pipes.

PFS is used in dyeing wastewater treatment
Poly ferric sulfate can replace the traditional molecular iron salt and aluminum salt coagulant. Compared with traditional coagulant, the amount of polyferric sulfate is smaller and the chroma removal rate is higher.

PFS is used in Electroplating wastewater
Poly ferric sulfate can be used as a coagulant and rutting agent in electroplating wastewater treatment. It is difficult for the complex to directly react with a coagulant such as polyaluminum chloride.

PFS is used in papermaking wastewater treatment
Poly ferric sulfate can be used as a coagulant instead of polyaluminium chloride, aluminum sulfate, etc. It can also be used for dewatering of paper sludge, which can achieve rapid flocculation and sedimentation.

Usage:
A) Before using, dissolve the product in running water in the proportion of 10-30% to have red brown solution, then dilute it to dosing solution required for coagulation, the concentration of dosing solution is 2 - 5% for drinking water treatment, and 5-10% for waste water treatment.
B) Optimum dosage: Viewing the different property of raw water, it can be determined by the experiment. For the waterworks, you may refer the dosage of other flocculant operated before. Under the same conditions, its dosage is almost equal to the poly aluminum chloride, 1/3 - 1/4 of the solid alum.

Features:
1) New, high quality and efficient inorganic polymer coagulant
2) Has good coagulation function with thick flocs and fast sedimentation and an excellent purifying effect
3) Safe, reliable, nonpoisonous and harmless: Doesn't contain any harmful substances such as aluminum, chlorine, heavy metal ions, and water phase transference of iron ions
4) Can be used in discolouring, dehydrating, deodorizing, degreasing, sterilizing as well as discarding heavy metal iron, radioactive substance and carcinogens in the water, and eliminate COD, BOD, and color
5) Can treat water with pH from 4 to 11, (the optimum pH is 6-9), pH barely changes after treatment, and has little corrosiveness effect to the equipment.
6) Has very good effect in purifying the river water with algae, low temperature and low turbidity, and slightly contaminated
7) Has a better effect in purifying the high turbidity river water

Packing
25kg/polypropylene woven bags with inner plastics bags
20MT in 20'FCL without pallet or 16MT in 20'FCL with pallet.

Storage
Store in a cool, dry and ventilated place.

Safety information
Non-hazardous for air, sea and road freight.

 

Frequently Asked Questions
Q1: May I get one free poly ferric sulphate sample before placing order?
Re: Yes, Sample are available. For small samples is free and you just need to bear the freight; 


Q2: Which payment is available for your company?
Re: T/T, L/C or D/P. You can choose the one which is convenient for you. 

Q3: How and when can I get my goods after payment?
Re: For small quantity products, they will be delivered to you by international courier within 2 days(DHL, FedEx, TNT etc.) 

For large quantity products,shipping by sea is worthwhile.It will cost days to weeks to come to your destination port, which depends on where the 
port is.

Q4: Is there any possible to use my appointed label or package?
Re: Yes. If needed, we'd like to use label or package according to your requirement. 

Q5: How can you guarantee the goods you offer is qualified? 
Re: We always believe honesty and responsibility are basis of one company, so whatever products we provide 

for you all are qualified. We will have goods tested and provide COA before delivery for sure.

Q6: What is the MOQ? 
Re: 1 ton for shipping.