Polyacrylamide Flocculant PAM for Water Treatment
Anionic polyacrylamide is a kind of high molecular polymer with water-solubility. It has active groups with rather strong positive charge and an effective function of floe collation. It is easily soluble in water and not soluble in some organic solvent like ethanol and acetone. And it is innocuous, colorless, flavorless and easy to absorb damp.
Anionic PAM Specification:
1) Appearance: White granule
2) Molecular weight: 12-20 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 89% minimum
5) Hydrolyzing degree: 10%-40%
6) Dissolving time: 1 hours maximum (25° C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
High solids removal
High performance high molecular weight anionic polyacrylamide
Excellent for white water recycle application
Low dosage with economical to use
PAM Application & Dosage Information:
Prepare a stock solution of Anionic polyacrylamide of up to 0.5% concentration via an automated make down unit or as a batch.
Allow the solution to age for 30 to 60 minutes for maximum effectiveness.
Then use good quality make up water to give secondary dilution of at least 10: 1 (clean water to stock solution). Then add as required.
AVOID the use of centrifugal pumps.
It is always advisable to do Jar test before bulk test, please refer to MSDS for more details.
For further technical assistance please contact Bluwat.
Spilled polymer is very slippery. Spills should be scooped and / or wiped prier to flushing with water. Being highly hygroscopic avoid from exposure to air.
|Items||Facade||Molecular||Solid content (%)||Anionic Charge||Solution Time (min)|