High Viscosity of Polymer Cationic for Sewage Wastewater Treatment

• Customization: Available
• CAS No.: 9003-05-8
• Formula: (C3h5no)N
• Model NO.: C-PAM
• Acid-Base Property: Neutral Surface Disposal Agent
• Certification: ISO 9001
• Environmental Protection: Yes
• Color: White
• Appearance: Powder
• Type: Sewage Treatment Chemicals
• CAS: 9003-05-8
• Application: Sewage Water Treatment
• Transport Package: 25kg Kraft Paper Bag, 25kg PE Bag
• Specification: SGS ISO
• Trademark: BLUWAT
• Origin: China
• HS Code: 39069010
• Production Capacity: 20000mt/Year

Product Description

Polymer Cationic Polyacrylamide for Sewage water treatment.

BLUWAT CHEMICALS is a leading manufacturer and supplier of polymer flocculant in China more than 10 years.

Polymer Cationic is simple called anionic PAM, it is a water soluble of high viscosity polymer and widely used in water treatment, paper making, petroleum, textile, etc.

Cationic polymer Specification:

Solid content	Molecular Weight	Cationic Degree	Dissolve time	Apperance
90%	8-12 million	10-40%	90 minutes max.	White granular

Application introduction:
For flocculation, it can be used for recovering solid substance treating industrial effluent, domestic sewage and purifying water, assisting filtering, treatment of coal, mining, and wee drilling slurry material, etc.

For viscosity thicker, it can be used for oil gas drilling additives and water injecting process in EOR (enhanced oil recovery).

For paper mills, it can be used for enhanced staying rate of filling material, speed size filterability and white water sedimentation in the paper and then coagulate to increase the strength of paper.

Solution make up:
To obtain homogeneous solution, efficient dispersion is necessary. The most convenient method of dispersing these products is with a polymer eductor or a commercially available dry powder feeder unit. Solution should be made up at 0.1-0.3% solid. Made-up water temperature should be between 10-40 for optimum product performance.
Following dispersion into agitated water, stirring should be contine for about an hour to ensure compelete dissolution. Stirring maybe carried out by propeller type stirrer with a speed of 200-500 rpm.
It is recommended to have both a stock make-up tank and a solution holding tank for dosage system. The above recommended anionic solution conventration are stable for up to a week. Aluminium, Zinc, Copper, or Iron should be avoided in the make-up system.

Healthy and safety:
PAM is not dangerous chemicals.
The products will be very slippy on ground after contacting water, any spill of product should be cleaned with water complety.
For detailed specification and application, please contact with us for more information.

Package:
25kg kraft paper bag or PE bags.