F7 Nano Coagulant for Municipal Waste Water Treatment Improvement and Upgrading

• Customization: Available
• Acid-Base Property: Acidic Surface Disposal Agent
• Certification: REACH
• Model NO.: F7
• Environmental Protection: Yes
• Color: Blackish Green
• Appearance: Liquid
• Type: Sewage Treatment Chemicals
• Transport Package: IBC
• Specification: ISO
• Trademark: Bluwat
• Origin: China
• Production Capacity: 10000 Ton/Year

Product Description

BLUWAT F7 is a high active liquid inorganic coagulant that offers higher efficient clarification in municipal and industrial wastewater treatment. BLUWAT F7 is Nano technology coagulant and have a lot of advantages for biological treatment process.

BLUWAT F7 can get better flocs structure and improve sedimentation of focs greatly, then improve MLSS and bacterial concentration during biological process, so treatment efficiency will be improved greatly. It is used in the treatment of the municipal and industrial wastewater treatment.








Better coagulation and sedimentation of flocs
Better SVI result
Decrease turbidity of treated water of 2nd sedimentation tank.
Promoting the growth and reproduction of bacteria in the aeration tank
Better removal of COD, BOD, TSS, TN and TP by 30-60%
Prevent Scam and Bulking problems
Reduction of sludge by 30-40%.
Better sludge dewatering efficiency
Lower treatment cost

Technical Data:

Specifications	Data
Appearance	Green to brown
Fe^+2, %	7.5-8.5
Chlorides, %	0.42-2.5
Density g/cm^3 20 ºC	1.2±0.1
pH	1-3

   
BLUWAT F7 should be dosed directly without dilution. A diaphragm metering pump of no-corrosive material is suitable.

Dosing point: After Aeration tank and before 2nd Sedimentation tank.
Package
IBC with 1250 kgs, 200 Lt drums, 24MT with flexi-tank

Applicable projects of BLUWAT F7:
1, The activated sludge settlement is relatively poor, improving the sludge settling ratio/SVI and improving the quality of treated effluent.
2, There is sludge bulking and sludge floating.
3, Improve sewage treatment plant treatment standard, increase the removal rate of COD, BOD, TSS, TN and TP.
4, Reduce contamination load of third stage treatment of the sewage treatment plant or replace the third stage treatment.
5. Partial and total substitution of flocculants such as polyaluminium Chloride and Ferric Sulphate to reduce the amount of chemical sludge
6, Increase the influent load of sewage plant and increase the sewage treatment capacity of existing facilities.
7. Improve the biological effect of biological system under low temperature in Winter.
8, Improve the stability and reliability of sewage treatment plant operation.